AUTOMATIC LEVEL CONTROLLER LC – 32
पानी आते ही, मोटर चालू
AUTOMATIC PUMP CONTROLLER OR AUTOLIFT
OR LEVEL CONTROLLER is panel mounted, solid state device when fitted to the
motor pump, automatically switches it on when the water level drops below a pre-set
minimum level & also puts it off when the water level reaches the pre-set
maximum level. It also switches off the pump when water is not available
in the corporation line (MCD) i.e. it offers dry running & air locking. We may synchronize it with a real
time programmable timer. so that it switches pump ON & OFF in
selected time slots as per our choice.
In this time slot, it has a cyclic
timer which switches the pump in every 8 minutes, if water is not available it
switches pump OFF in 2 minutes.
Salient Features:
·
Automatic
Switching of Motor Pump. * Displays Two Level of water in the tank.
·
AUTO/MANUAL
SWITCH * Power Light Blinks in Manual mode
·
Displays
sensor fault by Blinking of Max light
·
System
available for any type & make of pumps * Requires no Attendant & Maintenance.
·
Capable
of Controlling any number of Tanks (ON REQUEST)
·
Prevents
overflow & spillage of water, thus saves electricity & damage of roof.
- Protection against burning of motor due to
dry running & air locking
TECHNICAL SPECIFICATIONS
Operating Voltage : 220V AC, 50 Hz
Temperature : up to 55 oC
Humidity : up
to 85% R.H
Sensing Voltage : 12 Volts DC
Relay Contacts : 30 Amps, Resistive Load
Sensor Type : Conductive/Float/Magnetic
Expected Life : 1.2 X 106 Operations at 100% rating
Size Front Fascia
: 96mm
X 96mm
Panel Cutout : 92mm
X 92mm
Depth : 110mm
+ 5mm
Power Consumption : less than 15W
ओवरफ्लो के झंझट से छुटकारा
Manufactured
& Marketed:
ADVANCED
AUTOMATION (CPRI APPROVED), 1/3, DSIDC Shed Complex, Tigri, New Delhi - 110 080
(: +91-8700 91 97 98, +91-95994
25527 ,*: aadelhi@hotmail.com ; Web: http://advancedautomation.in
(Specifications may change due to continuous development process)